- Home
- Products
- FAQ
- Blog
- Services
- About Us
- Contact
- (+86) 187 5041 0800
- service@vancharli.com
- Within 24 hours response from our salesman
*Custom running vests for wholesale.*
Vancharli Outdoor makes custom running hydration vests for sports brands, wholesalers, buyers, and importers. We offer OEM and ODM development for road and trail running, with options for fit, front flask pockets, and rear reservoir storage. Running vests are part of our broader hydration gear range.
*Four reference styles with different pocket layouts and ways to carry water.*
You can adapt any of these reference styles or develop your own vest from technical drawings, sketches, photos, or a physical sample.
This vest has 5 L of storage, weighs about 230 g (8.1 oz), and adjusts to fit chest measurements from 80 to 120 cm (31.5 to 47.2 in). It has two front soft flask pockets and a rear compartment that fits a 1.5 L hydration reservoir.
Two tall mesh pockets sit on either side of the chest, with zippered storage lower down at the sides. Two front buckles connect the vest panels.
Two front sleeves hold soft flasks high on the chest, where the tops are easy to reach. Straps across the pocket openings help keep the flasks in place.
Two front bottle sleeves sit above lower storage pockets. Separate chest zip pockets give keys, gels, and other small items a place of their own.
*Choose the fit, materials, hydration setup, and branding for your running line.*
We can develop a single adjustable fit or a range of sizes. Shoulder panel shape, chest strap length, and buckle position can all be adjusted. If runners are likely to wear the vest over a jacket, we can allow for the extra layer when developing the fit.
Each part of the vest can use a fabric suited to its purpose. Mesh allows airflow through body-facing panels. Stretch fabric lets a pocket expand around its contents, while woven fabric can give a panel more structure. On the sample, you can compare how these materials feel and how they affect the weight of the finished vest.
We can size the front sleeves around your chosen soft flasks and set the pocket height so the flask tops are easy to reach. For a design that carries a bladder, we can develop the rear compartment, attachment point, and hose route around the selected reservoir. Gear storage and water capacity can be specified separately.
Choose colors for the vest panels, binding, and trims, then review the logo placement on a sample. Printed logos and woven labels can be matched to the fabric and location. If your range includes several sizes or hydration sets, retail labels can identify the size and what comes with each version.
*Factory support from the first product brief through bulk production and repeat orders.*
Before approving a vest for production, your team can compare the sample with the original brief and decide which changes matter for your product line. Vancharli Outdoor records the approved details in the production specification so everyone works from the same version.
Established in 1995 · OEM & ODM development · Typical MOQ of 300 pcs/style · Production resources in China and Southeast Asia
We can start an OEM project from your tech pack. If you have a product brief or a reference sample, we can help identify the details that still need to be decided before sampling.
An extra zip pocket, a different mesh, or another size can affect both the vest and its cost. We can review those choices with your team so you can decide which features are worth including at your target price.
A vest can sit differently once its front pockets are loaded. Reviewing the sample with filled flasks and the items runners normally carry helps your team judge the fit and see how easy it is to reach the pockets.
If you plan to sell a vest with flasks or a reservoir, you can review them together during development. That gives your team a chance to approve what goes into the set before confirming the wholesale order.
When an order includes several sizes or colorways, we can document the differences by version. Your team can review which labels, trims, and packaging belong with each version before production.
For a repeat order, the approved sample provides a reference for the existing design. If the next batch needs a new color, updated branding, or a pocket change, we can review the update against the version you previously approved.
*Construction details that affect how the vest feels and works on the run.*
On styles with adjustable chest straps, runners can change the tension after adding a layer or filling the front pockets. The front closures bring the two panels together so the vest can sit close to the upper body.
Front flask pockets let runners reach their water while wearing the vest. Where a pocket has a retainer, it helps keep the flask in position. On a reservoir-compatible vest with hose routing, runners can drink through the tube while the reservoir stays in the back.
A vest with both pocket types gives runners a choice. An open pocket works for items they reach for often, such as gels. A zippered pocket keeps smaller items such as keys enclosed while they run.
Mesh lets air pass through the panels that sit against the body. Where the vest has bound edges, the binding covers the fabric edges at the neck and arm openings, where the vest can brush against skin or clothing.
*Different runs call for different ways to carry water and gear.*
A runner on a long training route may want enough water to get from one refill stop to the next, along with a phone and a few gels. A front-focused vest suits a runner who wants to reach water and fuel without stopping to take off the vest.
On a route that alternates between sheltered trails and exposed ridges, a light shell may spend most of the run packed away. A vest with rear gear storage can hold the layer until it’s needed, while the front pockets stay available for water and food.
When aid stations are far apart, runners may need to carry more water as well as mandatory race gear. A vest that fits both front flasks and a rear reservoir lets them split the water between the front and back based on the route.
A club may want a consistent look across members who wear different sizes and run different distances. A shared vest design with an agreed size range and club branding can serve as the basis for a group order.
*Six production checks based on the approved sample and style specifications.*
Before production, we check fabrics, mesh, binding, webbing, buckles, and zippers against the approved material list. This includes checking the specified color, fabric type, and trim size.
We verify key panel and strap measurements against the approved pattern. For orders with several sizes, we check the relevant measurements and adjustment ranges for each size.
We inspect the stitching at shoulder seams, pocket openings, and strap attachment points, including any reinforcement specified for those areas. We also check that the binding lies evenly around the neckline and arm openings.
When the order specifies a flask or reservoir, we check how it fits in the intended pocket or compartment. Depending on the design, the check can also cover how the flask sits under its retainer, how the reservoir attaches, and where the hose exits the vest.
We check that buckles close and release, zippers open and close smoothly, and straps move through their adjusters. We also compare the strap routing and closure positions with the approved sample.
We check the finished appearance, size labels, and packaging against the order details. For hydration sets, we also verify that each vest is packed with the specified components.
*Answers for buyers comparing capacity, planning samples, and preparing wholesale orders.*
Our typical MOQ is 300 pieces per style. The final minimum depends on the design, materials, and mix of sizes or colors. If you have quantities in mind for each version, we can review them together as one order.
For the 5 L style shown here, 5 L is the vest’s total storage capacity. The rear compartment fits a 1.5 L hydration reservoir. When comparing designs, consider how much gear the vest needs to hold and how much water the runner needs to carry.
Yes, when the vest has compatible front sleeves and a rear reservoir compartment. For a custom project, we can check your chosen flasks and reservoir during sampling. The shape of each flask and the location of the reservoir’s hose connection can affect how they fit.
The order specification lists what comes with the vest. You can order the vest on its own or specify a set with selected flasks or a reservoir. For retail sets, the packaging can list the approved contents.
Yes. We can work from a tech pack, sketch, reference photo, or physical sample. You can review the vest construction, colors, logo placement, labels, and packaging before approving the style.
Yes. During the review, you can try the vest over the clothing your customers are likely to wear and load the pockets with the items they’ll carry. If the fit or access needs adjusting, we can address that before the preproduction sample is approved.
The schedule depends on the design, material availability, sample revisions, and order quantity. If the order includes hydration components, we also account for those when confirming timing.
Start with a reference style or your design, the intended use, and your estimated order quantity. If you already know the sizes, colors, branding, or hydration setup you want, include those details so we can quote the configuration you plan to order.
✅ Submit an inquiry for:
